|
[Sponsors] |
March 6, 2006, 08:08 |
What's the meaning of this error?
|
#1 |
Guest
Posts: n/a
|
Hi all, I got the following error while initializing a problem, does anybody knows what this means?
================================================== ============================ Stack backtrace generated for process id 30366 on signal 1 : Please include this information with any bug report you file on this issue! ================================================== ============================ /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16[0x859747f] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16[0x8597312] /lib/libpthread.so.0[0x40059d0d] /lib/libc.so.6[0x400c74f8] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16(Interpolate_Profile_Var+0x140)[0x81a1c80] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16[0x812db6d] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16(Update_Dynamic_Profiles+0x5f)[0x81a199f] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16(Get_Thread_Derived_Variables+0x104)[0x83c4634] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16(eval+0xb6f)[0x85c3d36] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16(eval+0xb6f)[0x85c3d36] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16(eval+0xd4a)[0x85c3f11] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16(eval+0xf0b)[0x85c40d2] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16[0x85c434a] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16(eval_errprotect+0x41)[0x85c43fb] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16(eval+0xb6f)[0x85c3d36] /opt/fluent/Fluent.Inc/fluent6.2.16/lnx86/2ddp/fluent.6.2.16(eval+0x2f3)[0x85c34ba] Error: fluent.6.2.16 received a fatal signal (SEGMENTATION VIOLATION). Error Object: #f Thanks & Regards, Vishal |
|
March 7, 2006, 09:15 |
Re: What's the meaning of this error?
|
#2 |
Guest
Posts: n/a
|
It is an error report that Fluent use to find out the cause of the problem I suggest checking over your mesh again. The other alternative is to fwd the case file and the error report to your Fluent administrator.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Accessing phi from a fvPatchField at same patch | johndeas | OpenFOAM | 1 | September 13, 2010 20:23 |
UDF: DEFINE_CG_MOTION for vertical jump motion of an electrode! | alban | Fluent UDF and Scheme Programming | 2 | June 8, 2010 18:54 |
checking the system setup and Qt version | vivek070176 | OpenFOAM Installation | 22 | June 1, 2010 12:34 |
[Netgen] Installation of Netgen in SuSE Linux 92 | edvardsenpriv | OpenFOAM Meshing & Mesh Conversion | 23 | January 16, 2009 06:12 |
error while compiling the USER Sub routine | CFD user | CFX | 3 | November 25, 2002 15:16 |