CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Postprocessing using Cotour

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 4, 2006, 08:17
Default Postprocessing using Cotour
  #1
MANOJKUMAR
Guest
 
Posts: n/a
Hello

I see the temperature using contur in which there is Globle option when I checked with Globle then temp is show same every where but when i see without that then it show temperature distribution properly is it correct. MANOJKUMAR
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
using fieldAverage library to average postprocessing eelcovv OpenFOAM Programming & Development 26 January 29, 2014 16:40
Postprocessing using pythonFlu + Matplotlib +Scipy francois OpenFOAM Post-Processing 2 June 21, 2011 11:26
how did I see next time step of velocity cotour ? Andy Chen FLUENT 2 June 30, 2009 12:48
Question about Postprocessing Using UDF(in tutoria sarah_ron2002 FLUENT 1 April 10, 2007 16:17
Postprocessing in 2D - specific area Anthony Wachs FLUENT 3 July 6, 2001 10:59


All times are GMT -4. The time now is 02:01.