CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

I don't understand the BC of FLUENT, overdimension

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 16, 2006, 12:25
Default I don't understand the BC of FLUENT, overdimension
  #1
friskies
Guest
 
Posts: n/a
Hi everybody,

I am trying to simulate a very easy problem in fluent. I have a single pipe full of water with one specie. I have a velocity inlet defined at 1.07. I want to introduce a variation function in the inlet for the mass fraction of the specie. The problem is that the outflow boundary condition is not working. It gives me 30 degrees less than the rest of the problem. Then if I use pressure-outlet I am overdimensioning the problet cause the specie mass fraction is fixed in the outlet. I want to fix the pressure at the outlet but I want fluent to compute the mass fraction of the specie at the outlet. It seems to me that BC overdimensionalize the problem and I don't fine the way to solve it. could anybody tell me something about this?

thanks in advance
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stopping a Fluent batch job AND saving the data! Possible? Volker Pawlik FLUENT 7 May 22, 2014 22:30
Two questions on Fluent UDF Steven Fluent UDF and Scheme Programming 4 September 20, 2013 16:30
Compared MRFSimpleFoam and Fluent in a centrifugal pump! renyun0511 OpenFOAM Running, Solving & CFD 8 July 6, 2010 06:24
Fluent 12.0 is worst then Fluent 6.2 herntan FLUENT 5 December 14, 2009 03:57
Problems in lauching FLUENT Lourival FLUENT 3 January 16, 2008 17:48


All times are GMT -4. The time now is 12:04.