Gambit question

March 30, 2006, 06:19

Hi, I have a problem I want to convert a 2D symmetrycal mesh into 3D. How can I do it.

Q

March 30, 2006, 06:35

create a volume with Revolve (from your face) you get your 3d volume, then just mesh your volume with Cooper (select your 2d Mesh as Source Face)

March 30, 2006, 06:47

How to revole the volume can you be more specific (tell me the command under which panel) thanks

Q

March 30, 2006, 07:47

Geometry Command Button / Volume Command Button / Form Volume (Click and Stay with right mouse for developping the other possibilies) or from your online help root: /gambit_help/html/modeling_guide/mg0205.htm#geom_volm_rev

March 30, 2006, 06:19	Gambit question	#1
Q Guest Posts: n/a	Hi, I have a problem I want to convert a 2D symmetrycal mesh into 3D. How can I do it. Q

March 30, 2006, 06:35	Re: Gambit question	#2
mAx Guest Posts: n/a	create a volume with Revolve (from your face) you get your 3d volume, then just mesh your volume with Cooper (select your 2d Mesh as Source Face)

March 30, 2006, 06:47	Re: Gambit question	#3
Q Guest Posts: n/a	How to revole the volume can you be more specific (tell me the command under which panel) thanks Q

March 30, 2006, 07:47	Re: Gambit question	#4
mAx Guest Posts: n/a	Geometry Command Button / Volume Command Button / Form Volume (Click and Stay with right mouse for developping the other possibilies) or from your online help root: /gambit_help/html/modeling_guide/mg0205.htm#geom_volm_rev

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit maillage question	stage81	FLUENT	0	October 1, 2010 10:06
Gambit question.	Pablo Cornejo	FLUENT	10	March 10, 2006 09:46
Gambit question	LI Y	FLUENT	2	April 6, 2003 16:59
a question about Gambit	Jack	FLUENT	5	February 6, 2003 06:04
an easy question about gambit	brian	FLUENT	3	December 2, 2002 23:58