CFD Online Logo CFD Online URL
Home > Forums > FLUENT


Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 5, 2006, 12:49
Default Help
Sastry Gunturi
Posts: n/a
I am modelling a cross-flow heat exchanger.....which can thought of 2 blocks (with a common face)....and a bunch of tubes pass through 2blocks.Water flows over the tubes in one block and air in the other.The temperature of Water and Air are 75 C and 25 C while the velocities are 0.05m/s and 5m/s. The rods should carry away heat from water and transfer to air....So there would be a varition in the temperature of rods.But in my model Iam able to see heat transfer and no temperature variation is seen.How could I do that???? Can anyone plz help me in this regards....Waiting for you guys response.....Thank you....
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 17:14.