CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   monitor the residual in the fidap (http://www.cfd-online.com/Forums/fluent/40539-monitor-residual-fidap.html)

ztdep April 12, 2006 02:06

monitor the residual in the fidap
 
Hi:

does sombody know how to monitor the residual in the fidap like in the fluent ,

i can see the residual only after the caculation has completed. so how to it simultanesly with the computation!

regards

Mirek April 14, 2006 13:30

Re: monitor the residual in the fidap
 
As I remember (I was working with Fidap about 3 or 4 years ago - by now with Fluent) you must open extra Fidap session and indicate currently running process (as I remember currently running process must be open with appropriate mode or something else). Sorry for such imprecise information but as I said I'm not working with Fidap by now, but I used to. I hope this information gives you a hint. Good luck


All times are GMT -4. The time now is 03:24.