CFD Online Logo CFD Online URL
Home > Forums > FLUENT

dynamic mesh problem,help!

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 15, 2006, 10:06
Default dynamic mesh problem,help!
Posts: n/a
hi all,i'm using a silding mesh for a interior and two interfaces attached to it. their velocity is given in DEFIN_CG_MOTION: vel[1] = u_t1; but they have different velocities each time step. the one command in just a time step Message ("disp = %le, cli = %le\n", u1, cli); actually puts : disp = 3.955120e-008, cli = -1.280314e-003 disp = 1.517457e-007, cli = -1.280314e-003 disp = 5.910051e-007, cli = -1.280314e-003

can anyone help me? thanx in advance sincerely.
  Reply With Quote

Old   April 16, 2006, 00:38
Default Re: dynamic mesh problem,help!
Posts: n/a
please help, i cannot figure out it for several days.
  Reply With Quote

Old   April 16, 2006, 00:44
Default Re: dynamic mesh problem,help!
Posts: n/a
i found that FLUENT accessed the micro DEFINE_CG_ MOTION for 3 times in a sigle tiem step, it's too strange i think.
  Reply With Quote

Old   March 4, 2014, 06:49
Default define_cg motion
New Member
Join Date: Oct 2012
Posts: 2
Rep Power: 0
mcsagesse is on a distinguished road
Hi all I am trying to write UDF for a flow over an oscillating flat plate. I have very very little knowledge of C++ so I am a novice, please I will need assistance from anybody that could help. After going through the Fluent Manual I believe I will need to write DEFINE CG_MOTION udf. Please I need your help. This is my personal email My major concern to write the udf for the plate oscillating along the y-axis


mcsagesse is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic mesh is not getting updated. cardio FLUENT 1 May 20, 2014 08:41
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
Incylinder dynamic mesh with volumetric reaction mas FLUENT 4 May 3, 2012 10:22
pls help. mesh collapsed with dynamic mesh. wlt_1985 FLUENT 1 July 28, 2011 01:53
Dynamic mesh + grid adapt = Crash! (Files included BillH FLUENT 4 July 24, 2007 15:31

All times are GMT -4. The time now is 11:52.