Fluent 2D Model - Axial Fan in a Duct -- CFD Online Discussion Forums

April 18, 2006, 02:25	Fluent 2D Model - Axial Fan in a Duct	#1
J Guest Posts: n/a	Hi, I want to model axial fan which is located in a duct. Fan characteristics (Ie Static Pressure Vs Flow rate) is known (From Fan manufacturers data). The Duct is 5 meter long (Each side 0.5 meter, square section) and fan is located at 3meters from the Inlet. Duct Inlet is at atmospheric pressure and outlet air discharge to atmosphere. Could any one let me know how to define Boundary conditions and fan characteristics (both Static presure and Flow rates)in Fluent modelling. Thanks J

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fluent setup to determine fan performance	afaik	FLUENT	5	August 1, 2014 04:27
[ICEM] domain interface in ICEM for fluent	hsn	ANSYS Meshing & Geometry	24	November 27, 2012 16:43
Reynolds Stress Model in Fluent Vs CFX	Tim	FLUENT	0	December 6, 2005 22:03
modelling fuel cell duct in fluent	rajesh kumar tippabhotla	FLUENT	2	October 7, 2004 12:04
Question about flow in ducted fan in another duct	Jane	FLUENT	0	June 21, 2004 13:57

All times are GMT -4. The time now is 14:14.