CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

BC's details unavailable from imported msh file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 19, 2006, 14:40
Default BC's details unavailable from imported msh file
  #1
ashish
Guest
 
Posts: n/a
Dear chandra and zxaar

as per the advise received from you, In Gambit I had imported *.msh file from fluent *.cas file. But the boundary conditions details are not available in the *.dbs file? how will I get the boundary condition details in the dbs file so that I can edit the bc's and export new msh file for fluent run.
  Reply With Quote

Old   April 19, 2006, 18:09
Default Re: BC's details unavailable from imported msh fil
  #2
zxaar
Guest
 
Posts: n/a
when you extract mesh from .cas file as i mentioned the boundary conditions are available.
  Reply With Quote

Old   April 20, 2006, 01:06
Default Re: BC's details unavailable from imported msh fil
  #3
ashish
Guest
 
Posts: n/a
I get the following error: is this a very serious error, please help.

Starting /pkgs/gambit2.0/Fluent.Inc/utility/fe2ram4.3/ultra/fe2ram.4.3.2 -m1e-06 -d3 -tRAMPANT -oFIDAP7 /home/ashish/3dmodel.cas.tar.cas

RAMPANT file to FIDAP7 file

Read 1994678 nodes, 1868000 elements, 14 groups. 1868000 hex elements

merged 0 nodes (1994678 remain)ERROR() error code = 101077

WHERE = -?- ERROR() error code = 101077

WHERE = -?-

Thanks a lot.
  Reply With Quote

Old   April 20, 2006, 04:30
Default Re: BC's details unavailable from imported msh fil
  #4
zxaar
Guest
 
Posts: n/a
why is the model compressed, uncompress it and see if it changes anything. Anyway it should have already worked i guess.
  Reply With Quote

Old   April 20, 2006, 08:06
Default Re: BC's details unavailable from imported msh fil
  #5
ashish
Guest
 
Posts: n/a
I will try and get back.
  Reply With Quote

Old   April 23, 2006, 04:29
Default Re: BC's details unavailable from imported msh fil
  #6
ashish
Guest
 
Posts: n/a
Hello zxaar,

the boundary conditions are available in the mesh file, but when i import the mesh in gambit i do not see the boundary conditions details, can you please help.

thanks.
  Reply With Quote

Old   April 23, 2006, 06:47
Default Re: BC's details unavailable from imported msh fil
  #7
ashish
Guest
 
Posts: n/a
Hello zxaar

one more thing which i found was when i read the msh file thus obtained as above and read in fluent i find that the zone id's have changed and when i solve i get the Floating Point Exception (Underflow) Error. this was not the case with the original fluent case file. can you please help.

thanks,

ashish.
  Reply With Quote

Old   April 24, 2006, 06:56
Default Re: BC's details unavailable from imported msh fil
  #8
zxaar
Guest
 
Posts: n/a
if you use the latest version of gambit, you will see it preserves the boundary condition names as they were.

  Reply With Quote

Old   April 24, 2006, 07:24
Default Re: BC's details unavailable from imported msh fil
  #9
zxaar
Guest
 
Posts: n/a
use journal file to describe the boundary conditions etc, when you describe BCs by TUI you can just use their name to specify the BC, you do not need the zoneid, let it change.

  Reply With Quote

Old   April 24, 2006, 08:13
Default Re: BC's details unavailable from imported msh fil
  #10
ashish
Guest
 
Posts: n/a
i specified the bc's in gambit and exportet the mesh, but while solving in fluent i get the error. where as the original case file does not give any error.

please help.

regards,

ashish.
  Reply With Quote

Old   April 24, 2006, 08:45
Default Re: BC's details unavailable from imported msh fil
  #11
zxaar
Guest
 
Posts: n/a
you haven't told what error it gives.
  Reply With Quote

Old   April 24, 2006, 11:26
Default Re: BC's details unavailable from imported msh fil
  #12
ashish
Guest
 
Posts: n/a
Hello zxaar

I though that you have read my earlier message in this thread:

"one more thing which i found was when i read the msh file thus obtained as above and read in fluent i find that the zone id's have changed and when i solve i get the Floating Point Exception (Underflow) Error. this was not the case with the original fluent case file. can you please help."

thanks,

ashish.
  Reply With Quote

Old   April 24, 2006, 18:14
Default Re: BC's details unavailable from imported msh fil
  #13
zxaar
Guest
 
Posts: n/a
i also thought you have read my other message, See when you read the mesh, and if you do not want to describe them again and again manually. describe them with the help of journal file. If you do this way, you do not need to worry about zoneid, you can specify by their names. So create a journal file to do the work for you. I will put and example here, or on wikipedia in FAQ section today.
  Reply With Quote

Old   April 24, 2006, 21:26
Default Re: BC's details unavailable from imported msh fil
  #14
zxaar
Guest
 
Posts: n/a
Here is an example of journal:

define boundary-conditions velocity-inlet inlet n n y y n 10 y n y 0 0.001 define boundary-conditions pressure-outlet outlet n 101325 n n y n y 2 0.001 n define boundary-conditions fluid rotzone n n n n n y 0 0 0 -50.00 0 0 0 0 0 1 n n n

put these things into a journal and read the journal, you can note that i have not used the zoneid but the zone name, inlet and outlet,
  Reply With Quote

Old   April 25, 2006, 00:08
Default Re: BC's details unavailable from imported msh fil
  #15
ashish
Guest
 
Posts: n/a
thanks for your journal. i will use this and get back.

regards,

ashish.
  Reply With Quote

Old   April 25, 2006, 01:14
Default Re: BC's details unavailable from imported msh fil
  #16
zxaar
Guest
 
Posts: n/a
you might have to create your own suitable to ur case, its easy to do it.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Working directory via command line Luiz CFX 4 March 6, 2011 21:02
Installation of OpenFOAM-1.6 on Ubuntu 9.10 marval OpenFOAM Installation 2 March 17, 2010 09:33
user subroutine error CFDUSER CFX 2 December 9, 2006 07:31
user defined function cfduser CFX 0 April 29, 2006 10:58
error while compiling the USER Sub routine CFD user CFX 3 November 25, 2002 16:16


All times are GMT -4. The time now is 13:30.