CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Validation for fire/smoke modeling (compart/atria)

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   April 24, 2006, 05:34
Default Validation for fire/smoke modeling (compart/atria)
Posts: n/a
HI all,

Currently working on a fluent model to simulate a 3D fire event -with smoke movement- in a relatively large compartment (small atrium). I looking for a suitable validation example to test my model and verify it. Fire is to be modeled as heat/mass source. Variables of interest are velocities, temperatures and CO/CO2 concentrations.

Any ideas?

Cheers, Amr
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
May Focus Area: Turbulence Modeling Jonas Larsson CFD-Wiki 0 May 2, 2006 11:48
Turbulence modeling for fan/compressor blading Jonas Larsson FLUENT 1 April 13, 2005 14:08
Modeling Flow/Saturation/Absorption in Fibers Gene Dougherty Main CFD Forum 0 June 6, 2003 14:49
Solid Modeling Chris Main CFD Forum 10 July 2, 2002 07:12
CFD Modeling of Two-phase Flow in Small Dia.Tubes Eric Poindexter Main CFD Forum 2 September 22, 2000 09:21

All times are GMT -4. The time now is 20:39.