CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

friction stir welding

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 25, 2006, 14:33
Default friction stir welding
  #1
raj
Guest
 
Posts: n/a
can somebody help me do a thermal analysis for friction stir welding? i am unable to get good results.i tried doing a 3ddp analysis using a simple sheet and cylindrical tool. i modeled the sheet as fluid and gave it vel of 1mm/s.gave its opening face a inlet vel of 1mm/s and outlet face was taken to be as outflow. other faces of sheet modeled as walls.the tool pin surface and tool shoulder surface were given a constant heat flux of 100w/m2. tool was given a rotational vel of 400rpm.i gave no convection coeff.just gave a ambient temp to all parts.i get weird results when i iterate from sheet inlet. please can someone help.i really need this help.

  Reply With Quote

Old   December 20, 2009, 15:18
Default want to do Modeling of Friction Stir Welding (FSW)
  #2
jsd
New Member
 
sachin
Join Date: Dec 2009
Posts: 1
Rep Power: 0
jsd is on a distinguished road
Hello Sir,

I want to do Modeling of Friction Stir Welding (FSW) ..if u have
idea..???...ANY basic cfd coding will be very great about this
.... pl give me some direction......
Your help is very much appreciated,

--
With best regards,
Sachin Patil
jsd is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
caculation of friction factor Dilip Main CFD Forum 9 February 23, 2016 06:00
welding modeling a.kale Fluent UDF and Scheme Programming 0 May 23, 2011 06:28
Thermocouple Welding Megatron FloEFD, FloWorks & FloTHERM 0 February 16, 2011 20:57
Openfoam friction coefficient differences. Peter88 OpenFOAM Post-Processing 0 February 8, 2011 11:07
Compute Skin friction coef by hand Francois FLUENT 1 February 10, 2006 07:21


All times are GMT -4. The time now is 13:47.