CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

gambit geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 11, 2006, 16:11
Default gambit geometry
  #1
sujeet
Guest
 
Posts: n/a
hi, i have to draw a rectangular sump in which a cylindrical pipe is inserted.some portion of pipe is inside the sump.any one have any idea how to make that geometry.
  Reply With Quote

Old   May 12, 2006, 07:55
Default Re: gambit geometry
  #2
san
Guest
 
Posts: n/a
Hi,

Subtract the pipe volume in sump volume. retain the pipe volume if required.

then mesh both the domain.

i hope this works for you.

With regards sangamanath
  Reply With Quote

Old   May 13, 2006, 13:32
Default Re: gambit geometry
  #3
sujeet
Guest
 
Posts: n/a
hi san, thanks for your reply.i tried that and it works but hoe do you manage your mesh and boundary conditions.i mean is sizing function required? should i go with default mesh option?

thanks.
  Reply With Quote

Old   May 15, 2006, 00:14
Default Re: gambit geometry
  #4
san
Guest
 
Posts: n/a
Hi,

Actually i wanted to know about size function. How to use size function while meshing.

with regards san

  Reply With Quote

Old   May 15, 2006, 05:25
Default Re: gambit geometry
  #5
sujeet
Guest
 
Posts: n/a
Hi, As far as i know size function is about refining your mesh at certain points in a geometry like corner or edges.you can get better idea in gambit's modelling guide.

with regards sujeet
  Reply With Quote

Old   May 15, 2006, 07:59
Default Re: gambit geometry
  #6
san
Guest
 
Posts: n/a
Hi,

can you send that part of tutorial to my mail id. rsan_2001@rediffmail.com

with regards san
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[GAMBIT] how to mesh a 3d spiral geometry in gambit seyedashraf ANSYS Meshing & Geometry 9 July 4, 2013 05:42
create turbine geometry with gambit badlaine ANSYS Meshing & Geometry 2 March 26, 2012 23:54
[GAMBIT] meshing in GAMBIT, a flow through a pipe having complex inflow geometry mazhar1613 ANSYS Meshing & Geometry 1 January 12, 2012 00:18
What can I employ to create geometry besides Gambit? summer ANSYS Meshing & Geometry 2 February 11, 2011 15:50
problem about Importing geometry in Gambit Hua Gu FLUENT 3 April 2, 2002 14:24


All times are GMT -4. The time now is 11:57.