CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

waterwheel in aquaculture pond - two phase

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 12, 2006, 03:37
Default waterwheel in aquaculture pond - two phase
  #1
wanwan
Guest
 
Posts: n/a
Dear All,

Currently I am using FLUENT6 to solve an aquaculture tank flow field problem. The goal is to investigate the effect of a rotating waterwheel on the tank flow pattern. The problem is I have trouble in setting the boundary conditions for the two phases waterwheel. For those who have experiences on this similar problem or have idea to help me out, I would be highly appreciated.

WanWan, A Master student of National Sun Sat-sen University, Taiwan

More information: link(http://photo.xuite.net/wanwangenius/773625/2.jpg) and the BC setting as(http://photo.xuite.net/wanwangenius/773625/1.jpg) In FLUENT, I was set VOF ,MRF(angular velocity equal to 3 rad per second) , viscous(k-epsilon).

The result is not good so far. Can someone tell me how to set BC for this question?

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to access only one phase in multiphase model by UDF wersoe Fluent UDF and Scheme Programming 1 January 4, 2017 08:11
alphaEqn.H in twoPhaseEulerFoam cheng1988sjtu OpenFOAM Bugs 15 May 1, 2016 17:12
VOF for single phase? vuccj7 FLUENT 0 April 20, 2011 20:59
two Phase column simulation chemeng OpenFOAM 3 August 18, 2010 13:53
compressible two phase flow in CFX4.4 youngan CFX 0 July 2, 2003 00:32


All times are GMT -4. The time now is 21:33.