CFD Online Logo CFD Online URL
Home > Forums > FLUENT

3D mesh around a wing using gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 15, 2006, 03:15
Default 3D mesh around a wing using gambit
M. ssuri
Posts: n/a
I am using Gambit for creating 3D mesh round a wing . I need a help for creating this mesh.

I tried many ways to mesh edges , faces and then volumes but this method worked for volumes which does not contain wing. For the volume which contains wing this method fails.

Why it fails I donot know ????!!! I need a help or advice for steps or useful websites?

Great Thanks
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting Fluent mesh files to Gambit neutral files samuelkc ANSYS Meshing & Geometry 5 July 24, 2013 08:02
[ICEM] Structured Mesh 3D Wing Tip Michiel ANSYS Meshing & Geometry 5 October 21, 2010 08:39
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Mesh Resolution in Gambit Vidya Raja FLUENT 2 January 19, 2006 00:35
3-D Mesh Check in Gambit..... SHR FLUENT 4 March 25, 2003 04:10

All times are GMT -4. The time now is 14:03.