CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Cooling problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 15, 2006, 07:09
Default Cooling problem
  #1
Luk
Guest
 
Posts: n/a
Hi all, Few days ago I placed here my notice of problem with cooling a solid body and have the solution but it is unacceptable. I have a geometry shaped of brick with the hole (solid metal body of initial temperature 100C) and cylinder symbolizing water (0C of inlet temperature). The cylinder matches hole in brick to ensure flow and cooling of the solid brick by cold water. I am interested in monitorin of temperature fall of the brick in time and heatin up the water. Both of these bodies are separately meshed and combined into one with tmerge. The shadow wall between them is properly created. I created all demended setting (materials, models etc). When I start the solver the monitors (volume mean temperatures) indicates cooling of the solid and heating up the water but it is unrealistic very slow (about 0.1C in time of one minute). Can anyone suggest any key factors (like BC's) that I could use to get more realistic solution? P.S. Flux Report indicates high heat transfer through the shadow wall (94930535) but 0 from the brick.

Thanks, Luk

  Reply With Quote

Old   May 15, 2006, 12:44
Default Re: Cooling problem
  #2
Chandra Murthy
Guest
 
Posts: n/a
have you tried without non-confirmal mesh?...
  Reply With Quote

Old   May 19, 2006, 03:25
Default Re: Cooling problem
  #3
Jordi
Guest
 
Posts: n/a
Hi Luk, I am working in a rdiator model. Wind tunel with a tub inside. In the wind tunnel there are air and inside the tub there are water. I got some good results if you want make some especific questions. U can ask me! In case my e-mail is j.martorell.82@hotmail.com , if you want to send me anything.

See you soon,

CHEERS, JORDI
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
conduction problem venkataramana OpenFOAM 3 December 1, 2013 08:30
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
area does not match neighbour by ... % -- possible face ordering problem St.Pacholak OpenFOAM 9 November 22, 2011 11:02
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13
Cooling simple 3D geometry problem Luk FLUENT 4 May 12, 2006 09:47


All times are GMT -4. The time now is 01:05.