CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Fluent Treatment of mixed boundary condition HELP

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 26, 2006, 06:46
Default Fluent Treatment of mixed boundary condition HELP
  #1
Amr
Guest
 
Posts: n/a
HI all,

I have been doing an unsteady 3D simulation for smoke and heat dispersion inside rooms. The source of both is like a trash basket. To introduce heat and smoke, the following options came to my mind:

1- To creat a volumetric heat source by setting a separate "fluid region" (call it fire region) in gambit and then define the heat source in Fluent. The same goes for CO2 and H2O as mass sources.

2-To creat the heat source as in (1) but avoiding the mass sources by setting the bottom of the (fire region above) as a mass flow inlet with a defined mass concentrations of CO2 and H2O.

Having said that, I wonder what happens when fluent sees my inputs in option (2). The fire region is a thin volume separated from the room volume by an "Interior" boundary face. Now, the mass flow inlet is not defined at this interior boundary face but rather defined at the bottom of the "fire region" thin volume. Is this a problem??? Could anybody guide me what option to use above???

Await your responses.

Cheers, Amr
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] icem fluent mesh with cyclic boundary condition jiejie OpenFOAM Meshing & Mesh Conversion 2 February 24, 2020 04:34
mixed inflow/outflow downstream boundary condition question peob OpenFOAM Running, Solving & CFD 3 February 3, 2017 11:54
External Radiation Boundary Condition (Two sided wall), Grid Interface CFD XUE FLUENT 0 July 8, 2010 07:49
fluent Boundary condition of supersonic flat plate Mechal FLUENT 0 December 16, 2005 17:07
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 19:11.