CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Not to display warnings?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 3, 2006, 19:39
Default Not to display warnings?
  #1
Yasser Nabavi
Guest
 
Posts: n/a
Hi everyone: I'm trying to do some simulations in FLUENT and I'm getting "reverse flow" or "turbulence viscoity ratio ..." warnings. Does anyone have any idea how to avoid displaying them on the consule? I just want them not to be displayed cause displaying them makes the simulation time much longer.

Thanks in advance

Yasser
  Reply With Quote

Old   June 3, 2006, 22:49
Default Re: Not to display warnings?
  #2
aPpA
Guest
 
Posts: n/a
go into "/solve/set/flow-warnings?" in the fluent console (text user interphase) and then fluent will ask if you want to enable the flow warning messages. you can disable them by typing "no". good luck
  Reply With Quote

Old   June 4, 2006, 04:27
Default Re: Not to display warnings?
  #3
Yasser
Guest
 
Posts: n/a
Many thanks for your help. I've got rid of "reverse flow" warnings but I still get "turbulent viscosity limited to .....". Is there any way to hide them too? Thanks alot

Cheers,

Yasser
  Reply With Quote

Old   June 4, 2006, 09:27
Default Re: Not to display warnings?
  #4
aPpA
Guest
 
Posts: n/a
you can ignore them in "solve/set/limiter-warnings?"(no). But i doubt if u want to ignore the viscosity limiting warning. I usually get the viscosity warning at the starting of the simulations, just until the solution gets stabilized. If the warning still appears later too, then i think there might be a problem with the problem setup. think about it. gl

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problems with Fluent display windows chris FLUENT 3 January 7, 2016 11:44
Problem with paraFoam ata OpenFOAM 14 November 30, 2009 05:23
free surface display carno Siemens 4 October 7, 2005 02:03
lots of warnings Arnab Siemens 2 January 27, 2005 16:36
Display Reynold Stresses in K-E Andrew FLUENT 4 April 16, 2004 19:12


All times are GMT -4. The time now is 07:02.