CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Contours in 3D model (http://www.cfd-online.com/Forums/fluent/41261-contours-3d-model.html)

HAR June 5, 2006 00:51

Contours in 3D model
 
I want to create the contours (not filled) of velocity and volume fraction in a 3D model. However, fluent asks me for selecting a surface for rending (default-interior) and this shows me the mesh. I don't want to see the mesh, just the contours. Any suggestion?

Thanks in advance,

Humberto

sam June 5, 2006 03:38

Re: Contours in 3D model
 
not really. display mesh in face form. then select those surfaces in contours frame and click on display. it should work

HAR June 5, 2006 10:41

Re: Contours in 3D model
 
Sam, thanks for the hint!


sam June 7, 2006 14:29

Re: Contours in 3D model
 
it worked????

Humberto June 7, 2006 15:16

Re: Contours in 3D model
 
What I did as to create an iso-surface of water (vf=0.5), then I plotted the grid (wall) and apply transparency of 75. Then I plot the contours of the iso-surface with velocity magnitude. I got a nice figure.


All times are GMT -4. The time now is 17:26.