CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   how to display contours in unsteady.......... (http://www.cfd-online.com/Forums/fluent/41266-how-display-contours-unsteady.html)

sandra June 5, 2006 16:26

how to display contours in unsteady..........
 
i have simulate the flow of air in unsteady case , i want to display my contours or vectors every time(5 seconde,10....) give me the procedure step by step please

thanks in advance

HAR June 5, 2006 18:14

Re: how to display contours in unsteady..........
 
What I have done is to set up the animation options before interating in order to save every time step you want. Solve=>Animation=>Define..., After the simulation, you can watch the animation every time step you selected. It should work.


san June 6, 2006 03:10

Re: how to display contours in unsteady..........
 
Hi,

i wanted to know how to carry out unsteady case in fluent. i have two fluids flowing through concentric tubes.

outer fluid is cold fluid and inner fluid is hot fluid. inbetween we have solid wall.

flow is counter flow.

it will be very helpfull if you can give solution regarding this.

with regards san

sandra June 6, 2006 07:31

Re: how to display contours in unsteady..........
 
i don't want work with animate

sandra June 6, 2006 08:16

Re: how to display contours in unsteady..........
 
hi, har its very very easy ,can you specify your probleme


All times are GMT -4. The time now is 02:56.