CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

how to display contours in unsteady..........

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 5, 2006, 16:26
Default how to display contours in unsteady..........
  #1
sandra
Guest
 
Posts: n/a
i have simulate the flow of air in unsteady case , i want to display my contours or vectors every time(5 seconde,10....) give me the procedure step by step please

thanks in advance
  Reply With Quote

Old   June 5, 2006, 18:14
Default Re: how to display contours in unsteady..........
  #2
HAR
Guest
 
Posts: n/a
What I have done is to set up the animation options before interating in order to save every time step you want. Solve=>Animation=>Define..., After the simulation, you can watch the animation every time step you selected. It should work.

  Reply With Quote

Old   June 6, 2006, 03:10
Default Re: how to display contours in unsteady..........
  #3
san
Guest
 
Posts: n/a
Hi,

i wanted to know how to carry out unsteady case in fluent. i have two fluids flowing through concentric tubes.

outer fluid is cold fluid and inner fluid is hot fluid. inbetween we have solid wall.

flow is counter flow.

it will be very helpfull if you can give solution regarding this.

with regards san
  Reply With Quote

Old   June 6, 2006, 07:31
Default Re: how to display contours in unsteady..........
  #4
sandra
Guest
 
Posts: n/a
i don't want work with animate
  Reply With Quote

Old   June 6, 2006, 08:16
Default Re: how to display contours in unsteady..........
  #5
sandra
Guest
 
Posts: n/a
hi, har its very very easy ,can you specify your probleme
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2D, Can't Display Filled Contours. David FLUENT 6 September 24, 2012 04:21
Display pathLines and contours together Chris FLUENT 1 November 29, 2006 06:34
display contours at any time urgent sandra FLUENT 0 June 1, 2006 08:59
display contours every time linda FLUENT 1 May 28, 2006 21:17
display contours every time sandra FLUENT 5 May 28, 2006 00:29


All times are GMT -4. The time now is 10:59.