CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

error message

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 11, 2006, 19:21
Default error message
  #1
Thijs
Guest
 
Posts: n/a
hello, I get following error message (Fluent 6.2): "could not allocate fine level coefficient matrix" does anybody know what could be the problem. Can it be due to the pretty large grid I am using and what can I do about it? thanks
  Reply With Quote

Old   June 12, 2006, 08:38
Default Re: error message
  #2
Jason
Guest
 
Posts: n/a
That's a memory error. Your mesh is too big for the system you're running on, or there's too much other stuff running on that system so you don't have enough memory.

You could change your domain (run a smaller portion of the model), coarsen your mesh, or run in parallel (for which you need more than one computer and at least one parallel license).

Hope this helps, and good luck, Jason
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 03:52.