CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   How to Set the velocities of two phases (http://www.cfd-online.com/Forums/fluent/41331-how-set-velocities-two-phases.html)

K Saleem June 9, 2006 10:18

How to Set the velocities of two phases
 
Hi Fluent Users:‎ I have a stratified two phase (oil-water) flow into a pipe. I was used the two BC ‎velocity inlet and pressure outlet. I have a problem to set the velocity at the inlet to ‎the two phases. So anyone can help me by tell me how can I set the values of these ‎velocities of the two phases from the same inlet? Knowing that I was used the VOF ‎model?‎

Khalid Baker


Naser June 10, 2006 01:41

Re: How to Set the velocities of two phases
 
Dear Khalid

The mixture model allows the phases to move at different velocities, using the concept of slip velocities.

NOT VOF!!


All times are GMT -4. The time now is 02:58.