CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

reading laminar viscosity of cells

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 13, 2006, 10:38
Default reading laminar viscosity of cells
  #1
Siddharth Khowala
Guest
 
Posts: n/a
hi all Is thr any way to read the laminar viscosity of cells in (laminar,steady) flows.I checked the UDF manual and it seems i can only access them in cases of turbulent flows.any help would be appreciated

regards
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11
[Commercial meshers] Mesh conversion from Ansys ICEM fabian_korn OpenFOAM Meshing & Mesh Conversion 3 February 24, 2010 09:19
[snappyHexMesh] external flow with snappyHexMesh chelvistero OpenFOAM Meshing & Mesh Conversion 11 January 15, 2010 20:43
kinematic viscosity at diff temperatures,pressures Mecobio Main CFD Forum 0 November 7, 2005 13:55
Problem of Turbulent Viscosity Ratio Limited David Yang FLUENT 3 June 3, 2002 07:13


All times are GMT -4. The time now is 14:12.