CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   How get u' and v' k-eps model (http://www.cfd-online.com/Forums/fluent/41389-how-get-u-v-k-eps-model.html)

Benzamia June 14, 2006 18:32

How get u' and v' k-eps model
 
Hi evry body. i made 2 d simulation for flow on channel. i used K-eps model. to compare my results with those of the experiment. I must have u' and v' . i could'nt get there in XY PLOT please show me how do that in fluent for XY PLOT.

Thanks evry body

benzamia


karuna s koppula June 15, 2006 00:44

Re: How get u' and v' k-eps model
 
Hi Benzamia,

you are solving for the <u> and <v> (RANS equations). you may be able to plot <u>, <v>, or <u'v'> etc. but may not be able to directly plot u' and v'. thank you karuna

Ralf Schmidt June 15, 2006 01:36

Re: How get u' and v' k-eps model
 
have a look at

http://www.cfd-online.com/Forum/main...cgi?read=44194

Ralf


All times are GMT -4. The time now is 16:22.