CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

How get u' and v' k-eps model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 14, 2006, 18:32
Default How get u' and v' k-eps model
  #1
Benzamia
Guest
 
Posts: n/a
Hi evry body. i made 2 d simulation for flow on channel. i used K-eps model. to compare my results with those of the experiment. I must have u' and v' . i could'nt get there in XY PLOT please show me how do that in fluent for XY PLOT.

Thanks evry body

benzamia

  Reply With Quote

Old   June 15, 2006, 00:44
Default Re: How get u' and v' k-eps model
  #2
karuna s koppula
Guest
 
Posts: n/a
Hi Benzamia,

you are solving for the <u> and <v> (RANS equations). you may be able to plot <u>, <v>, or <u'v'> etc. but may not be able to directly plot u' and v'. thank you karuna
  Reply With Quote

Old   June 15, 2006, 01:36
Default Re: How get u' and v' k-eps model
  #3
Ralf Schmidt
Guest
 
Posts: n/a
have a look at

http://www.cfd-online.com/Forum/main...cgi?read=44194

Ralf
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
question about turbulence model selection and sensitivity karananand Main CFD Forum 1 February 26, 2010 04:41
Centrifugal Pump and Turbulence Model Michiel CFX 12 January 25, 2010 03:20
Problems bout CFD model of biomass gasification, Downdraft gasifier wanglong FLUENT 2 November 25, 2009 23:27
Reynolds Stress model in CFX vs Fluent Tim CFX 1 October 7, 2009 06:19
Grid resolution for full-scale and down scaled model gravis Main CFD Forum 0 October 2, 2009 10:27


All times are GMT -4. The time now is 11:37.