CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   "Clearing partially read grid" (https://www.cfd-online.com/Forums/fluent/41476-clearing-partially-read-grid.html)

Peter June 22, 2006 16:45

"Clearing partially read grid"
 
I've got a car mesh with 1.2 Million cells. While loeading it in Fluent the error below occurs. It's weird because i computed with the same mesh once. Any idea what might be wrong? Thanks in advance

Building...

grid, face[22061]->node0[0] out of range (0<node<1135616). Error: Build_Grid: grid error.

Clearing partially read grid.

Aidan June 23, 2006 11:35

Re: "Clearing partially read grid"
 
I have had similar problems before. Are you using windows or Linux OS?

Peter June 23, 2006 12:00

Re: "Clearing partially read grid"
 
In both cases (Windows, Suse) i get the same problem. After exporting from Gambit Fluent declines to accept. But i computed with the same geometry before. So i don't know the reason for that.


All times are GMT -4. The time now is 00:13.