CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Case Reading in Fluent (http://www.cfd-online.com/Forums/fluent/41518-case-reading-fluent.html)

Youenn June 26, 2006 07:23

Case Reading in Fluent
 
Hi,

When I want to read my mesh file with Fluent, it gives me this error message :

#Error: no cells in zone, id = 0, ind1 = 1, indn = 0Reading Cells: failed while reading section 12.

Clearing partially read grid.#

How can I find which zone is creating problems and what kind of problem is this?

Thank you for answering !

Rola June 29, 2006 02:42

Re: Case Reading in Fluent
 
Hi

I think the problem in your mesh file, hence you may make another mesh file by Gambit. Make sure that this file is correct, then open it by Fluent. It will be good, I guess.

Rola

Youenn July 4, 2006 03:47

Re: Case Reading in Fluent
 
Thank you for the advice.

In fact my mesh wasn't that good, I had a few EquiAngle Skews superior to 0.9.

Youenn.


All times are GMT -4. The time now is 17:49.