CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   mass flow inlet (http://www.cfd-online.com/Forums/fluent/41564-mass-flow-inlet.html)

Mech June 30, 2006 07:31

mass flow inlet
 
Hi I am simulating compressible flow. I use inlet mass flow rate, inlet static pressure and inlet temperature. Also outlet pressure. I need to initialize the flow from inlet as I want to keep inlet pressure fix. When I want to initialize form inlet the it shows access violation and do no initialize. can anybody tell what is the problem? Thanks.

M K Prabakaran July 4, 2006 04:10

Re: mass flow inlet
 
Dear Mech,

You try to intialize from other zones first. then save & quit. open fluent again, and intialize again from the zone u want.. this will work.

Not only initialization, the underrelaxation also plays a role in convergence.

MKP.


Mech July 7, 2006 07:37

Re: mass flow inlet
 
Hi M. K. Prabakaran Thank you a lot for your response. I will do according to your suggestion. have a nice time. Mech


All times are GMT -4. The time now is 06:02.