CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Please Help on defining internal inlet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 7, 2006, 11:32
Default Please Help on defining internal inlet
  #1
George
Guest
 
Posts: n/a
Please I need help in defining an inlet that is fully in the fluid region and not on the boundary. Please if anyone has a detailed procedure, it would be greatly apreciated. Thanks in advance
  Reply With Quote

Old   July 11, 2006, 02:24
Default Re: Please Help on defining internal inlet
  #2
draussen
Guest
 
Posts: n/a
How does this look like? It must be a boundary, at least a single line!? Or do you want to model a source in the fluid??
  Reply With Quote

Old   July 11, 2006, 03:07
Default Re: Please Help on defining internal inlet
  #3
George
Guest
 
Posts: n/a
Thanks for the help. I have a tobe contains a series of Nozzles (300) with very small diameters (0.0013 in) that spray a gas insilde a vacuum chamber. The gas in coming through a tube to the Nozzle tube. Since it is impossible to model the actual geometry of the nozzle. I tried to model it as an inlet (face) that is totally inside the region. I guess this definition does not constitute a mass source. Please Help me with any suggestion. Regards
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Internal Flow BCs for Compressible inlet flow Katie FLUENT 2 March 3, 2012 17:35
Setting dynamic pressure as the inlet BC ruined FLUENT 1 March 26, 2008 06:30
Setting static pressure as the inlet BC ruined FLUENT 1 March 21, 2008 15:57
Defining Duct Inlet Pressure Distribution? Eric FLUENT 1 February 8, 2008 16:50
transitional inlet boundary condition kamp CFX 1 June 21, 2006 11:08


All times are GMT -4. The time now is 20:42.