CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

2D axisymmetry_unpositive area

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 10, 2006, 04:43
Default 2D axisymmetry_unpositive area
  #1
Isabelle
Guest
 
Posts: n/a
I must resolve a 2D-axisymmetric problem. But I cannot handle the meshing of this problem. I have everytime a problem of non positive area in my grid. However, if I transfor the boundrary "Axis" to "Wall", the check is a success. What is the problem please?

Best regards.
  Reply With Quote

Old   July 10, 2006, 07:10
Default Re: 2D axisymmetry_unpositive area
  #2
Gernot
Guest
 
Posts: n/a
In most cases problems with the axysymetric setup are caused by positioning the axis. Go back to your grid generator and check if your axis is EXACTLY on the x-Axis.

  Reply With Quote

Old   July 10, 2006, 13:17
Default Re: 2D axisymmetry_unpositive area
  #3
KP
Guest
 
Posts: n/a
place your geometry +X, +Y in Gambit.The axis you rotate that is +x should be made axisymmetry. You will not encouanter any of the difficulties. KP
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Problem with reference area alfaben STAR-CCM+ 2 September 17, 2011 03:46
Non overlap area fractions saisanthoshm88 CFX 9 April 26, 2011 13:05
CFX Solver Memory Error mike CFX 1 March 19, 2008 08:22
Storing Surface Area of each cell in a file? Markus Alzon FLUENT 0 June 21, 2007 08:38


All times are GMT -4. The time now is 02:49.