CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

species

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 10, 2006, 15:54
Default species
  #1
greg
Guest
 
Posts: n/a
haw to get access to one species from mixure? I want to do an if-else statement over one species from mixture. It should be something like this: if thread = fluid thread and species = species 1 (there is two species in micture) than..... etc. is it possible?? Can you tell me how to write this ? thank you for your time
  Reply With Quote

Old   July 11, 2006, 03:46
Default Re: species
  #2
cax
Guest
 
Posts: n/a
hi. what do you want to do with your species in the mixture?if you want to define properties, you can use a DEFINE macro,in which cell,thread and species identities are passed as arguments. for example, a DEFINE_DIFFUSIVITY macro should be written with i the species ID DEFINE_DIFFUSIVITY(yourfonction,c,t,i) { if i=1 ..... else ... end }

hope it will help u
  Reply With Quote

Old   July 11, 2006, 04:53
Default Re: species
  #3
greg
Guest
 
Posts: n/a
thanks for reply. I want one species to boil. One species has 373 K boiling temperature and another has 800K. I`m trying to do it with DEFINE_SOURCE nad DEFINE_MASS_TRANSFER but I all species from fluid phase boil together. I though that it will be possible to do a loop over only one species. thank you for your time

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Modelling Biomass Combustion via Species Transport Racheal FLUENT 29 June 4, 2015 19:48
Species mass flow inlet lorenz FLUENT 3 March 15, 2012 08:26
Species order fluent Raddi FLUENT 1 March 13, 2009 01:21
mass fraction of species Ahmed FLUENT 0 April 18, 2007 11:57
How to specify surface flux of a species? ked FLUENT 16 February 9, 2006 21:14


All times are GMT -4. The time now is 18:09.