CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Need help in eulerian simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 5, 2006, 07:38
Default Need help in eulerian simulation
  #1
draussen
Guest
 
Posts: n/a
Hello, I want to model the mixing of granular media in a reaktor just by flow in the gravity field. Therefor I first want to model the discharge of the reactor (to solve the problem stepwise)! I use the 2d, axissymmetric,unsteady, eulerian multiphase model with 2 phases (air and granular sand)! I've got a time step size of 1e-5 seconds. The Problem is that I always get reverse flow on pressure outlet. Without patching the reactor interior with sand, there is no problem! I think there is a problem with my boundary conditions. what is the real sence of the backflow volume at pressure outlet? I do get enough information about it in the users guide?

Please help me!!!!!
  Reply With Quote

Old   July 6, 2006, 01:52
Default Re: Need help in eulerian simulation
  #2
kumar
Guest
 
Posts: n/a
if u r working for a batch case,then set the outlet as pressure outlet and volume fraction=0.0
  Reply With Quote

Old   July 11, 2006, 02:22
Default Re: Need help in eulerian simulation
  #3
draussen
Guest
 
Posts: n/a
Thank you for your answer, so far!!!I even have to try this!!!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why my simulation not agree with the wind tunnel experiment zhaowei CFX 4 July 11, 2015 04:36
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 11:44
GUI crash and simulation engine still running RPJones FLOW-3D 2 November 9, 2010 09:18
velocity profile export from a simulation onto another sudhirlv STAR-CCM+ 1 September 12, 2010 19:57
strange simulation error Ralf Schmidt FLUENT 2 May 4, 2007 14:02


All times are GMT -4. The time now is 05:15.