CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Open channel flow with FLUENT 6.1.22

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 11, 2006, 02:16
Default Open channel flow with FLUENT 6.1.22
  #1
Walid
Guest
 
Posts: n/a
I use Fluent 6.1.22 and i want to simulate an open channel flow, the problem is that when I specify the multiphase model (VOF) there isn't a case to check The Open Channel flow?? which is normally under the VOF scheme there is a problem with this version?

thanks for help
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
open channel flow: pressure-inlet jack1980 FLUENT 1 October 21, 2012 14:15
Open channel flow with stratified flow k.baker FLUENT 0 December 3, 2010 03:30
how to use Up Stream boundary condition in open channel Flow ms.jafarinik FLUENT 0 April 18, 2010 14:38
Complex problem: Open Channel Flow lett FLUENT 17 April 9, 2009 10:56
Open Channel Flow Ryan FLUENT 1 March 17, 2008 11:10


All times are GMT -4. The time now is 17:55.