|July 19, 2006, 08:52||
Dependence Inlet conditions : k and eps
I had a look about all related post but didn't find a proper answer. I am trying to simulate the flow around some simple bluff body , like cylinder a sphere in 3D. I am using the keps realizable, steady, y+<3, fluid water. first oder in pressure , second order in M, SIMPLE.
Inlet Turbulence Specification Method : K and epsilon according to 6.2.2 in the fluent user guide.
I am using the 2 formulas to get k and eps (6.2.4 and 6.2.5 in the guide): k=1,5 x (Uavg x I)^2 AND eps = f(Cu,k,l).
1-if I used I=0,1 and l=0,8m I get some value of k and eps and get approx the right value for the Drag (Re=25000).
2-If I used I=0,01 (smaller) my drag in than 20% less.
I have used finner grid and it seems to be the same result. Does the converged solution should be independent of the intial values ? which value of I and so k should be choosen ?.
Thanks for your help
|Thread||Thread Starter||Forum||Replies||Last Post|
|turbulent jet flow RANS validation||heavy_user||OpenFOAM Running, Solving & CFD||12||December 17, 2015 21:35|
|calculate values for eps and k from Re or u?????||sbar||OpenFOAM Pre-Processing||5||August 16, 2010 04:10|
|Initial guess of k and eps at the Inlet.||PK||FLUENT||0||March 23, 2006 11:13|
|Boundary conditions for KEPS||Tom||Main CFD Forum||0||August 21, 2003 06:03|
|re-number dependence of diffusor-flow||peter schaffarczyk||FLUENT||0||February 4, 2001 03:28|