CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

VOF simulation free surface caused by gas inject

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 17, 2006, 03:19
Default VOF simulation free surface caused by gas inject
  #1
rensb
Guest
 
Posts: n/a
hi,my friends

i have read a article about the vof simualtion, the case is there is a ladle full of water, and behind there is xoygen lance ,the problem is simualtion the free surface caused by oxygen lance injection. how to set the interface of gas and liquid .

thank you for your advice
  Reply With Quote

Old   July 18, 2006, 10:06
Default Re: VOF simulation free surface caused by gas inje
  #2
Aniss
Guest
 
Posts: n/a
i have the same probleme between vap/liq interface in bubble cavitation collapse?!!!!
  Reply With Quote

Old   July 19, 2006, 17:27
Default Re: VOF simulation free surface caused by gas inje
  #3
J.Gimbun
Guest
 
Posts: n/a
I dont really understand what is your problem, but if you wana simulate a gas entrainment on the liquid surface just use initialise patch. Good luck.
  Reply With Quote

Old   July 19, 2006, 20:16
Default Re: VOF simulation free surface caused by gas inje
  #4
rensb
Guest
 
Posts: n/a
the problem is in the clinder ladle full of water(half height),and above the water ,in the center of the ladle there lied an laval nozzle which spray oxygen and so on, the spray gas will inject into water and caused the water move, how to simulate this case the free surface is cared for ,and after patch ,it is difficult to converge,how to solve. thank your advice.
  Reply With Quote

Old   July 20, 2006, 05:45
Default Re: VOF simulation free surface caused by gas inje
  #5
J.Gimbun
Guest
 
Posts: n/a
Definietly some difficulty in getting convergence. In the initial stage try small time step and few iteration/time step. Later on adjust it to be much higher and more time step to get convergence every time step.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
VOF free surface vortex simulation mahdiii FLUENT 3 May 14, 2013 16:33
free surface of VOF and melting model? wanghong FLUENT 3 March 13, 2006 10:57
define a layer at the free surface in VOF model UDF for normal distance at free surface in VOF mo FLUENT 0 March 20, 2005 07:20
turbulence simulation and free surface vineet Main CFD Forum 3 September 23, 2001 12:25
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19


All times are GMT -4. The time now is 04:48.