CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

wind turbine blade

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By Lim

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 31, 2006, 10:52
Default wind turbine blade
  #1
Lim
Guest
 
Posts: n/a
I'm designing a wind turbine blade and I want to calculate the power extracted. The model will be imported from Pro/Engineer into Gambit and meshed and analysed in Fluent. But I don't know how to obtain the power generated by the rotor in a constant wind speed. The model is in 3D. Any help is very much appreciated.

If analysing the rotor in full 3D model is difficult, can I analyse one of the blades and get its torque? How to do it in 3D blade?

Thanks

dokphysique likes this.
  Reply With Quote

Old   December 3, 2013, 22:28
Default wind turbine blade design
  #2
New Member
 
Prakul Mittal
Join Date: Dec 2013
Location: Montreal
Posts: 3
Rep Power: 12
prakul is on a distinguished road
Hi Lim,
i had also started working on same stuff to full fill my my course requirement, i had selected a 31 m blade , can u give me few details on analysis as i am little struck on modeling it in ansys , any help would be highly appreciated..

Quote:
Originally Posted by Lim
;134622
I'm designing a wind turbine blade and I want to calculate the power extracted. The model will be imported from Pro/Engineer into Gambit and meshed and analysed in Fluent. But I don't know how to obtain the power generated by the rotor in a constant wind speed. The model is in 3D. Any help is very much appreciated.

If analysing the rotor in full 3D model is difficult, can I analyse one of the blades and get its torque? How to do it in 3D blade?

Thanks
prakul is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
please help in simulating a wind turbine blade in 6 DOF ????.... usman naseer Main CFD Forum 2 March 10, 2016 03:53
Can I use Turbogrid to mesh a wind turbine blade? Henry Liu CFX 10 November 10, 2011 06:41
Calculating lift force of a wind turbine blade problem LittleBart CFX 4 June 29, 2011 03:33
Modelling of 2D Wind Turbine Blade (HAWT) Richeom FLUENT 1 August 11, 2010 05:18
Wind Turbine Blade Geometry SeanieB Main CFD Forum 0 November 27, 2009 11:18


All times are GMT -4. The time now is 05:38.