CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Two Questions about FLUENT Skills (http://www.cfd-online.com/Forums/fluent/41921-two-questions-about-fluent-skills.html)

Mr.Kim August 3, 2006 04:16

Two Questions about FLUENT Skills
 
I'm a undergraduate student studying Fluent tutorial now. If you could give me a little help, it would be very grateful to me. ^^

There is a hexahedron chamber. It has three holes, two is small and one is larger. With these holes, make the chamber to be vacuummed.

From atmospheric pressure to 5Pa, use two small holes, and to vacuum, use a larger hole.

๋ฌธ์ œ๋Š", 5Pa ๊นŒ์ง€๋Š" ์ž'์€ ๊ตฌ๋ฉ ๋งŒ์„ ์‚ฌ์šฉํ•˜์-ฌ ๊ธฐ์ฒด๋ฅผ ๋ฝ'์•„๋‚ด๊ณ , The problem here, if the pressure leads to 5Pa, FLUENT has to be stopped at that point, and switch the condition(from small holes to larger one) it should be reIterationed.

So, I made every effort to find that menu in FLUENT, but I could not find any.

Is Everyone know about that?

It would be very thank you ... ๊ทธ ๋‹ค์Œ๋ถ€ํ„ฐ๋Š" ํฐ ๊ตฌ๋ฉ ๋งŒ์„ ์‚ฌ์šฉํ•˜์-ฌ ์ง„๊ณต์- ์ด๋ฅด๊ฒŒ ํ• ๊ฒƒ์ธ๋ฐ์š"~

FLUENT ๋ฉ"๋‰ด ์ค'์-์„œ, ์ผ์ • ์••๋ ฅ(์-ฌ๊ธฐ์„œ๋Š" 5Pa)๊นŒ์ง€ ๋‹ค๋‹ค๋ž์„ ๋•Œ, Stopํ•˜๋Š" ๊ฒƒ์ด

์–ด๋–ค ๊ฒƒ์ด ์žˆ์„๊นŒ...ํ•˜๋Š" ๊ฒƒ์ž…๋‹ˆ๋‹ค.

5Pa์-์„œ ์Šคํƒ' ํ•œ ๋‹ค์Œ, ํฐ ๊ตฌ๋ฉ์œผ๋กœ ์กฐ๊ฑด์„ ๋ฐ"๊ฟ"์„œ Iteration ํ•ด ์ฃผ์–ด์•ผ ํ•˜๊ฑฐ๋" ์š"~

์„ ๋ฐฐ๋‹˜๋"ค... ์กฐ์–ธ ๋ถ€ํƒ๋"œ๋ฆฝ๋‹ˆ๋‹ค. ^-------^

์•„์ฐธ~ ํ•œ ๊ฐ€์ง€ ๋" ์-ฌ์*™๊ณ ์ž...

์ฒด์ ์„ ์•Œ๊ณ ์žˆ๋Š" ๋Œ€๊ธฐ์••์˜ Chamber๋‚ด์˜ ์œ ๋Ÿ‰ ๊ตฌํ•˜๋Š" ๋ฐฉ๋ฒ• ์ข€... ^^;;


Mr.Kim August 3, 2006 04:22

Re: Two Questions about FLUENT Skills
 
I'm an undergraduate student studying Fluent tutorial now. If you could give me a little help, it would be very grateful to me. ^^

There is a hexahedron chamber. It has three holes, two is small and one is larger. With these holes, make the chamber to be vacuummed.

From atmospheric pressure to 5Pa, use two small holes, and to vacuum, use a larger hole.

The problem here, if the pressure leads to 5Pa, FLUENT has to be stopped at that point, and switch the condition(from small holes to larger one) it should be reIterationed.

So, I made every effort to find that function in FLUENT, but I could not find any.

Is Everyone know about that?

It would be very thank you ...

The other one is...

The way(or equation) to measure a flux of the already known size of hexahedron.



All times are GMT -4. The time now is 21:23.