CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   export gambit-unbound variable (http://www.cfd-online.com/Forums/fluent/41945-export-gambit-unbound-variable.html)

ernie August 6, 2006 18:33

export gambit-unbound variable
 
Dear All,

i did export my gambit model to fluent. when i read the case in fluent, errors appeared as these..

Reading "C:\pc1.msh"... 328145 nodes.

47711 mixed wall faces, zone 4.

960 mixed pressure-outlet faces, zone 5.

6 mixed pressure-outlet faces, zone 6.

48 mixed mass-flow-inlet faces, zone 7. 1963737 mixed interior faces, zone 9. 777155 mixed cells, zone 2. 102283 mixed cells, zone 3.

Building...

grid, Note: Separating wall zone 4 into zones 4 and 1.

wall -> wall (4) and wall:001 (1) Note: Separating mass-flow-inlet zone 7 into zones 7 and 8.

air -> air (7) and air:008 (8) Note: Separating interior zone 9 into zones 9 and 10.

default-interior -> default-interior (9) and default-interior:010 (10) Note: Separating interior zone 9 into zones 9 and 11.

default-interior -> default-interior (9) and default-interior:011 (11)

materials,

interface,

domains,

zones,

default-interior:011

default-interior:010

air:008

wall:001

default-interior Error: access: unbound variable Error Object: phase-domain?

Error: access: unbound variable Error Object: phase-domain?

Error: access: unbound variable Error Object: phase-domain?

wall

fuel

fluid

mass-flow-inlet-7

pressure-outlet-6

pressure-outlet-5

shell conduction zones, Done.

Interrupting... Done.

what does this mean? any advice / suggestion.

Thanx in advance -ernie-


All times are GMT -4. The time now is 09:16.