CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

urgent..!-unassigned interface zones

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 14, 2006, 09:22
Default urgent..!-unassigned interface zones
  #1
khairel
Guest
 
Posts: n/a
i've tried to run the simulation on sliding mesh in Fluent but when i try to initialize, there's warning about unassigned interface zones.how can i solve this problem?please help me..thank you.
  Reply With Quote

Old   August 14, 2006, 13:15
Default Re: urgent..!-unassigned interface zones
  #2
Jason
Guest
 
Posts: n/a
Define->Grid Interfaces

Make sure you've assigned a grid interface (in Fluent) for each set of BCs you have defined as interface. You originally defined them in your meshing package (Gambit?), now you just have to tell Fluent that your interface is between Interface.A and Interface.B.

Hope this helps, and good luck, Jason
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
unassigned interface zones me3840 FLUENT 2 June 16, 2011 14:11
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05
Unassigned interface zone detected Michael FLUENT 0 February 1, 2006 10:17
Replace periodic by inlet-outlet pair lego CFX 3 November 5, 2002 21:09


All times are GMT -4. The time now is 10:27.