CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Warn: Connected geometry may be imprinted by the r

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 20, 2006, 12:29
Default Warn: Connected geometry may be imprinted by the r
  #1
mohmed
Guest
 
Posts: n/a
Hi Everybody !

When I was uniting two volumes I got the following warning message.

Warn: Connected geometry may be imprinted by the requested operation.

Can anyone help me what this means

  Reply With Quote

Old   August 22, 2006, 21:53
Default Re: Warn: Connected geometry may be imprinted by t
  #2
sam
Guest
 
Posts: n/a
its not a problem..
  Reply With Quote

Old   August 23, 2006, 05:16
Default Re: Warn: Connected geometry may be imprinted by t
  #3
jessica
Guest
 
Posts: n/a
thankyou
  Reply With Quote

Old   August 23, 2006, 06:40
Default Re: Warn: Connected geometry may be imprinted by t
  #4
sam
Guest
 
Posts: n/a
i wanted to say that i some times creates two edges for two faces , which originally were having common edge. But it happend sometiems. most of the time it is just a warning to dont care
  Reply With Quote

Old   August 23, 2006, 06:59
Default Re: Warn: Connected geometry may be imprinted by t
  #5
Jason
Guest
 
Posts: n/a
I agree with Sam... the intent of the warning is to get you to look over the geometry to make sure nothing odd happened. Another problem I've had is that sometimes one of the faces will be copied, but the edges are still connected to the original volume, so you don't notice it until you try to mesh and you get weird things going on. The easy way to check is to turn off the volume, and if there are any faces remaining, then that's what happened. But like Sam said, it only happens sometimes, and typically there's nothing wrong.

Jason
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Import netgen mesh to OpenFOAM hsieh Open Source Meshers: Gmsh, Netgen, CGNS, ... 32 September 13, 2011 05:50
CheckMeshbs errors ivanyao OpenFOAM Running, Solving & CFD 2 March 11, 2009 03:34
CheckMeshbs errors ivanyao OpenFOAM Running, Solving & CFD 0 March 10, 2009 23:07
Courant no%23 and sharp corner in 3D jam OpenFOAM Running, Solving & CFD 6 November 18, 2008 08:21
Warn: Connected geometry may be imprinted rajeev FLUENT 2 July 18, 2001 13:34


All times are GMT -4. The time now is 12:01.