CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Reversed flow on external aero problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 21, 2006, 16:30
Default Reversed flow on external aero problem
  #1
Ben
Guest
 
Posts: n/a
Hi All,

I'm running an external case for a NACA0012 wing and I'm getting reversed flow at the flow field outlet. Do you think this is something I should worry about? I'm going by the assumption that its far enough away from the point of interest not to matter a whole lot. My flow field boundaries are 20c away all around the wing except in front where its 15c.

Cheers, and thanks in advance. Ben
  Reply With Quote

Old   August 21, 2006, 17:05
Default Re: Reversed flow on external aero problem
  #2
shalu
Guest
 
Posts: n/a
check your gauge pressure value at outlet. if it is different at different outlet boundaries then u might get reversed flow. or if u ar specifying some non-zero gauge pressure at outlet keeping oprating pressure Atmospheric and in reality it should match with Atmospheric conditions then too u can get reversed flow.
  Reply With Quote

Old   August 22, 2006, 11:05
Default Problem reversed flow on internal flow IC.Engine
  #3
Niki
Guest
 
Posts: n/a
when i saw this forum,i also have some question here about the scavenging simulation for two-stroke engine.When i run the modelling,similar problem like above problem (reversed flow),i try to change the value of control solution setting.I dont know how solve the reversed flow.hopes anyone can help me:.,this my email.,ir_nik@yahoo.co.uk
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
flow past abdominal aorta. Complex BC problem. ziemowitzima OpenFOAM Running, Solving & CFD 1 July 26, 2022 06:12
Complex problem: Open Channel Flow lett FLUENT 18 November 10, 2018 19:30
reversed flow at pressure inlet and turbulent viscosity is limited.... cfdiscool FLUENT 10 June 10, 2015 07:15
Reversed flow error with thin film heater MK FLUENT 1 February 12, 2009 11:26
Poiseuille flow problem Rosie FLUENT 1 December 6, 2002 17:52


All times are GMT -4. The time now is 07:07.