CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

concentration in monitoring surface help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 23, 2006, 05:31
Default concentration in monitoring surface help
  #1
mohamednajoura
Guest
 
Posts: n/a
i want to monitor concentration of dye with time at the exit of my reactor . thus i must specify the report type in solve-monitor-surface example :mass weighted average,integral,area average.......... what is the report type that i must specify ? best regards

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Problems with coedge curves and surfaces tommymoose ANSYS Meshing & Geometry 0 August 5, 2011 16:02
Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 June 29, 2009 00:48
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 17 December 7, 2007 01:33
concentration in monitoring surface help help urge gladiator FLUENT 0 August 25, 2006 11:55
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 16:29.