CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Eulerian Model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 3, 2006, 20:44
Default Eulerian Model
  #1
Hassan
Guest
 
Posts: n/a
Hi Cadaie

as u know i am simulating a "eulerian transient model". i patched say .5 of my solid phase into one of the fluid zone. Air moves that solid phase into the adjacent fluid zone and some of the solid phase is pushed out of the system. i wanna know the amount of the solid phase left in the system. what i tried is i took the average volume fraction (vf) of solid in the each zone and multiplied that one with total volume of their respective zone and took sum over all zones and result didnt make sense to me. is there any way to calculate the actual solid amount left in the system?

Thanks Hassan
  Reply With Quote

Old   September 4, 2006, 08:02
Default Re: Eulerian Model
  #2
cadaei
Guest
 
Posts: n/a
Try using Report->Volume Integrals
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 18 March 3, 2015 06:36
question about eulerian model for packed bed rone FLUENT 2 July 19, 2007 20:58
Mass and het transfer using eulerian model Pablo FLUENT 0 February 16, 2007 09:36
the Eulerian model and the lower volume fraction hx li FLUENT 2 October 27, 2005 06:17
Strain Rate in eulerian model galeazzo FLUENT 0 January 25, 2005 08:52


All times are GMT -4. The time now is 11:27.