regarding blower analysis

raki_mech81@yahoo.co.in · January 17, 2012, 02:25

Hi
I am working on blower analysis.I gave mass flow rate of 0.58kg/s at the inlet and pressure outlet as zero guage pressure.after the convergence i am getting negative mass flow rate at the outlet..plz help me..

shk12345 · January 17, 2012, 09:22

Check the following things
first try to use a velocity inlet instead if mass flow inlet.

Second sometimes fluent gives negative value because the direction of flow in against the positive axis .
may be your fluid is going out in the negative direction.

thanks
shk

January 17, 2012, 02:25	regarding blower analysis	#1
raki_mech81@yahoo.co.in New Member cfd Join Date: May 2010 Posts: 7 Rep Power: 15	Hi I am working on blower analysis.I gave mass flow rate of 0.58kg/s at the inlet and pressure outlet as zero guage pressure.after the convergence i am getting negative mass flow rate at the outlet..plz help me..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD Analysis Of Centrifugal Blower	saurabh9978	Main CFD Forum	3	August 1, 2011 02:55
Regarding the boundary conditions for blower	nagababug	STAR-CCM+	0	May 18, 2010 02:29
3D analysis of Ahmed body	Irshad22	FLUENT	0	December 17, 2009 04:33
Modeling a 3D blower	eddie	FLUENT	0	March 6, 2006 18:23
Short Course: Computational Thermal Analysis	Dean S. Schrage	Main CFD Forum	11	September 27, 2000 17:46

January 17, 2012, 09:22	hi	#2
shk12345 Senior Member shoeb khan Join Date: Nov 2011 Posts: 179 Rep Power: 14	Check the following things first try to use a velocity inlet instead if mass flow inlet. Second sometimes fluent gives negative value because the direction of flow in against the positive axis . may be your fluid is going out in the negative direction. thanks shk