CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Problems on Compiling UDF in FLUENT (http://www.cfd-online.com/Forums/fluent/42453-problems-compiling-udf-fluent.html)

Strawberi-KeatKeat October 3, 2006 22:34

Problems on Compiling UDF in FLUENT
 
Dear all :

I am facing a very inrritating problem while compiling the UDF file for a dynamic mesh of a 2D part. It cant find the file, where i can hook it..

Can anyone help ?

Dushan October 4, 2006 01:50

Re: Problems on Compiling UDF in FLUENT
 
The dynamic mesh UDF's can be hooked in the 'Dynamic Zones' panel. e.g.

Define > Dynamic > Mesh Zones

If your problem is that the UDF does not appear in the drop down menu than you should make sure that it is loaded to the case you're currently working on. To load the UDF manually, make sure the library folder in which the UDF was compiled to is in the same directory as the case file. Then open the manage UDF's panel,

Define > User-Defined > Functions > manage...

Once you load it the UDF should appear in the drop down list in the Dynamic Zones panel.


All times are GMT -4. The time now is 01:55.