CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

how to give boundary condition profile

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 8, 2006, 11:06
Default how to give boundary condition profile
  #1
seeta
Guest
 
Posts: n/a
hi all may i know what is the procedure for hooking the wall boundary condition profiles in fluent through UDF. tahnks for helping me............
  Reply With Quote

Old   October 10, 2006, 13:44
Default Re: how to give boundary condition profile
  #2
Shanti
Guest
 
Posts: n/a
Hi

You have to use the DEFINE_PROFILE to define the BC's.

Hope it helps.. Shanti
  Reply With Quote

Old   October 12, 2006, 06:22
Default Re: how to give boundary condition profile
  #3
seeta
Guest
 
Posts: n/a
thanks for helping but i know that i have to write DEFINE_PROFILE. the problem with where i have to hook this profile. IN wall boundary conditions there is no option to hook the profile. hope u understand my problem.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Unsteady Boundary Profile with data file Arianna FLUENT 34 July 29, 2019 17:35
mixed inflow/outflow downstream boundary condition question peob OpenFOAM Running, Solving & CFD 3 February 3, 2017 11:54
Problem with assigned inlet velocity profile as a boundary condition Ozgur_ FLUENT 5 August 25, 2015 05:58
Pressure Inlet Boundary Condition Profile arapha FLUENT 0 April 4, 2011 17:23
External Radiation Boundary Condition for Grid Interface CFD XUE FLUENT 0 July 9, 2010 03:53


All times are GMT -4. The time now is 22:39.