CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Vaiable Material properties

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 26, 2006, 09:43
Default Vaiable Material properties
Posts: n/a
Hai friends,

Can any one explain how to give variable material properties. Actuall i had a block consist of two different materials. How to give material properties seperatly.

Any help please
  Reply With Quote

Old   November 26, 2006, 12:57
Default Re: Vaiable Material properties
Posts: n/a
Create two different volume for each block and assign properties. This would be the easiest way.
  Reply With Quote

Old   November 29, 2006, 14:12
Default Re: Vaiable Material properties
Mr.Nantaratn Kananai
Posts: n/a
Hi Pialisen,

I think when you set material, you set from menu Define/Material... This is a menu for load material from library. If you have 2 materials or more, use menu Define/Boudanry Condition.... then select 'Fluid.1' and click 'Set'. Then, the dialog box will shown you a material that you want to choose for 'Fluid.1', And, I think you should have 2 fluids ,( set by Gambit )

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
problem with specifying material properties cavani CFX 5 March 9, 2011 19:36
Temperature-dependent material properties in chtMultiRegionFoam-Solver sebonator OpenFOAM 0 November 15, 2010 09:15
How to add more material properties sarahsun CFX 1 October 27, 2009 08:27
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
Two-Phase Buoyant Flow Issue Miguel Baritto CFX 4 August 31, 2006 12:02

All times are GMT -4. The time now is 10:30.