CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Mass Conservation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 5, 2006, 02:15
Default Mass Conservation
Posts: n/a
One more question from me ... I am modelling a flow through porous media...I am consistently getting a difference of 13% between inlet and outlet flow rates. There is no flow from any other boundaries... Is this due to the Fidap Solver? I am solving a Low Re, Steady state Laminar Problem.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mass conservation in COMSOL Diego Main CFD Forum 1 December 27, 2010 06:14
lost of mass conservation jjchristophe FLUENT 0 June 18, 2010 05:44
Mass conservation problem in mixing tank multiphase simulation rockewan FLUENT 0 April 6, 2010 12:34
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
Mass conservation Diego Nogueira Main CFD Forum 1 July 30, 2004 15:50

All times are GMT -4. The time now is 00:39.