CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Pressurized heat exchanger

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 5, 2006, 11:06
Default Pressurized heat exchanger
  #1
jimmy
Guest
 
Posts: n/a
i'm kinda new at using pressure in fluent so here's my problem : i'm trying to model a part of a tubular heat exchanger with the followings specs :

Te pipes (63mm diameter) are fed with air at 570K, speed 30m/s and with 10 bar absolute pressure in the pipe and oriented perpendicular to the main flow in the shell

the shell is fed with air at 1220K, under atmospheric pressure and with a speed of 10m/s.

the big problem is to specify the 10 bars of pressure in the pipes since the operating pressure is set a 1atm.

Can someone help me to adjust boundaries condition to correctly set my problem in the tubes.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heat Exchanger Model sak2129 FLUENT 3 September 26, 2017 02:29
Macro Heat Exchanger not selecting (Please help!) zdeth FLUENT 2 September 11, 2012 14:52
UDF for Heat Exchanger model francois louw FLUENT 2 July 16, 2010 03:21
Heat Exchanger Simulation tightaznbreaka FLUENT 0 March 18, 2010 16:45
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 04:14.