Problem with Grid display
 

Hi,

I am trying to run a basic flow over a flat plate simulation using fluent in windows OS.

However after importing the grid from GAMBIT into fluent, when I ask the Fluent to display the grid, I get the following message

Error: Floating point error: didide by zero Error Object: ()

I have no idea what the problem is. Can someone help me?

thanks

Re: Problem with Grid display
 

Hi!

The floating point error is discibed here:

http://www.cfd-online.com/Wiki/Fluen..._I_avoid_it.3F

But, the case you mentioned is not explained there. It might be a problem with the graphic driver, see

http://www.cfd-online.com/Forum/flue...cgi/read/15684

or

http://www.cfd-online.com/Forum/flue...cgi/read/24923

Hope, it helps

Ralf

Re: Problem with Grid display
 

hi,

Thanks for the reply. I was going through the fluent website and I found the solution.

I am posting the link so that people with similar problems can be benifited

http://www.fluent.com/software/stude...l/graphics.htm

ragards Avinash